R7800, Build custom Netgear R7800 firmware for a larger flash size/root space

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67

  
sudo apt-get install subversion g++ zlib1g-dev build-essential git python rsync man-db
  
sudo apt-get install libncurses5-dev gawk gettext unzip file libssl-dev wget

git clone https://github.com/openwrt/openwrt.git openwrt
  
cd openwrt
  
git fetch -all -tags -prune
  
git checkout tags/v17.01.2

./scripts/feeds update -a
  
wget https://downloads.lede-project.org/releases/17.01.4/targets/ipq806x/generic/config.seed -O config.seed
  
rm -rf .config*
  
mv config.seed .config

#Edit the following file with your favorite editor:
  
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts

#for R7800:
  
#1. DON'T TOUCH kernel and ubi. and I won't touch reserve neither.
  
#2. Remove netgear section. it contains, actually, nothing useful, if you want to use lede.
  
#3. extend ubi partition to the end of original netgear partition.

# luci support
  
./scripts/feeds update packages luci
  
./scripts/feeds install -a -p luci

# make menuconfig 不要用root账号
  
make menuconfig #set "Target System", "Subtarget", "Target Profile";
  
make defconfig #恢复默认配置

# 选了dnsmasq-full就不要选dnsmasq了, 编译的时候会冲突
  
Base system> dnsmasq-full>Build with IPset support.

#调试用的, 选用。
  
kernel modules>Netfilter Extensions>kmod-ipt-debug
  
Administration>syslog-ng

# make -j8 V=s不要用root账号
  
make -j8 V=s #(build OpenWRT with console logging, you can see where build failed.).

编译出来的img到这找:  bin/targets/ipq806x/generic/lede-17.01.4-ipq806x-R7800-squashfs-factory.img

sudo ip link set enp0s31f6 up
  
sudo ip addr add 192.168.1.11/24 broadcast 192.168.1.255 dev enp0s31f6

tftp -v -m binary 192.168.1.1 -c put lede-17.01.4-ipq806x-R7800-squashfs-factory.img

1
2
3

  
cat /proc/mtd